QZK920M Hydraulic Paper Guillotine
QZK920M Hydraulic Paper Guillotine ...
|Max Cutting Size(L*W)||940*940mm|
|Max Cutting Thickness||120mm|
|Front Table Length||610mm|
|Main Motor Power||3000W|
|Max Clamping Power||3500Dan|
|Cutting Speed||42 times/min|
1. High quality casting part made by resin bonded sand way.
2. Chrome-plated slot-less working table installed with double imported linear guide and air cushion.
3. With ball screw.
4. Mechanical assistance device for knife replacement.
5. Overload protection safety device.
6. Infrared photoelectric protection device.
7. Knife cutting only operated by pressing two buttons at same time.
8. Fluorescent lamp and cutting line indicator.
9. Ejective device for knife bar.
10. Use imported components in Hydraulic system.
11. Use imported electronic units like Siemens, TOSHIBA, ORMON, LG, Schneider and Fotek.
12. Omron PLC control.
13. Driven by LG converter, the maximum speed of the back gauge is 10 m/min.
14. Use imported Mechanic components like NSK Bearing.
15. Single Hydraulic/Double Hydraulic Optional.
16. Adjust hydraulic pressure manually and the paper can be pressed twice by
The description of computer
1. Four language choice (Chinese ,English, Spanish and Portuguese)
2. Units could be toggled between Metric & Imperial
3. M5’s back gauge has the position resolution of 0.1mm, closed-loop controller,
electrical position error of 0.1 mm and no need for position error adjustment.
4. M5 has the storage capability of 90 cutting programs. For each program, the machine
will stop cutting until the paper pusher arrive at the middle limited position. After detach the
false clamp and switch to program status, the machine will stop cutting until the paper pusher
arrive at the front limited position. During this process, there is no limited on cutting capacity).
5. The malfunction diagnose and misoperation preserve functions of M5 is strong.
6. Auto operation function.
7. 8 inch LCD